01845 444431

LR Motors
1&2 Sussex Court, Thirsk Industrial Park, Thirsk, North Yorkshire,
YO7 3TA
Get Directions

Accessories

In 2018 LR Motors became Europe's sole importer for Hannibal Safari Equipment. From Jerry can holders, to four-man, family roof tents, we can either supply or offer fitted products to enhance the look and functionality of your Defender. Our workshop in North Yorkshire, is experienced in converting your vehicle into exactly what you require. We are able to fit or provide anything from wheels & tyres, to interior upgrades to performance enhancements. Please get in touch via phone or email for more information. We would love to help you build your dream Defender®.  

Impi roof tent by Hannibal

Impi roof tent by Hannibal

The Impi can be fitted to any vehicle, with most roofbar or rack system - from a V.W. Golf, to the serious off-road vehicle.  A great feature on the Impi is the rain shelter on the front door. This keeps the rain out the tent when entering or leaving.  The low profile glass fibre design of the Impi keeps wind noise to a minimum, resulting in not only more pleasant travelling, but also the most fuel efficient tent design on the market. The Fibreglass shell protects the tent from U.V. degradation, thereby extending the life of your tent, whilst keeping maintenance to a minimum. The Impi has been designed with your ultimate comfort in mind. It has three acess doors, each with mosquito netting, for maximum ventilation. The standard Hannibal quality matterass guarantees your comfort - 75mm high density foam, washable 100% cotton cover.  Two gas shocks enable the tent to open by itself - just a few seconds from releasing the catches and you're in bed. The roof of the shell is covered by a quilted, anti-condensation, thermal lining - not only insulation from heat and cold, but also prevents condensation on the roof. 

Specifications:
Closed: length 2.2m * width 1.35m * 320mm high, weight 72kg
Open: length 2.2m * width 1.3m * 1.5m high.

Price £2245.83 + vat

*New canvas should be thoroughly wet before use and allowed to dry. Repeat 2 to 3 times to ensure sealing up of the seams. The wetting process will season the canvas and allow the canvas to shrink and stitching to swell. 

*If water ingress is experienced from the seams use a Bees wax stick over the seams.

Hannibal 1.2m Deluxe roof tent

Hannibal 1.2m Deluxe roof tent

 

The concept of roof tents was pioneered in South Africa and the country has long been the market leader in design and production of tough, quality roof tents.  The safety factor and advantage as a lookout position have made roof tents the most sought after, of safari tents.

The ability to test the Hannibal roof tent in the field, over rough terrain and in all-weather African conditions, has enabled us to produce a roof tent of strength and reliability

STRENGTH

  • Fabric:   The Hannibal roof tent makes use of waterproof, "dynaproofed" 380g polycotton ripstop; strong yet able to breath
  • Seams:   Double stitched; edged with binding
  • All seams have been waterproofed
  • Stitching:   Superior strength quality thread
  • Flysheet:   Waterproof 210 denier Oxford nylon
  • Fly sheet poles:   4mm electro galvanised spring steel
  • Roof tent frame poles:   Annodised aluminium
  • Hinges:   3mm stainless steel; long lasting and rustproof
  • Roof tent cover: UV stabilised PVC, seams are welded for absolute waterproofing
  • Zips:   Inner and outer; lifetime guarantee YKK
  • Base boards: Our roof tent has 12mm marine ply for best insulation and strength

- Extra raised flysheet for shading and coolness when in the roof tent.
- Flysheet is extended past the doors for better rain and wind protection.
- Adjustable roof tent windows open fully for better venting and photography.
- Mosquito nets on every opening; all unzip separately.
- Inner tent has a torch bag, plus two additional storage compartments (shoes/toiletries/other).
- Zips:  U-zips on front and back entrances ensure that your roof tent can be totally sealed against mosquitoes and flying insects.
- 70mm High density foam mattress helps make the Hannibal roof tent almost as comfortable as your own bed.
- The mattress cover is zipped and can be removed for laundering.
- Spacious hinging allows for bedding to be left inside tent when travelling.
- Steps fully profiled for comfort on bare feet.

Size Specifications:

1.2m Wide

  • Rigged size:  1.3m high x 1.22m wide x 2,44m long (NOTE: roof tent is longer than the normal length of 2.2m)
  • Packed size:   300mm high x 1.2m wide x 1.2m long
  • £1595.83 plus vat

*New canvas should be thoroughly wet before use and allowed to dry. Repeat 2 to 3 times to ensure sealing up of the seams. The wetting process will season the canvas and allow the canvas to shrink and stitching to swell. 

*If water ingress is experienced from the seams use a Bees wax stick over the seams.

1.6m Roof tent

1.6m Roof tent

The concept of roof tents was pioneered in South Africa and the country has long been the market leader in design and production of tough, quality roof tents.  The safety factor and advantage as a lookout position have made roof tents the most sought after, of safari tents.

The ability to test the Hannibal roof tent in the field, over rough terrain and in all-weather African conditions, has enabled us to produce a roof tent of strength and reliability

STRENGTH

  • Fabric:   The Hannibal roof tent makes use of waterproof, "dynaproofed" 380g polycotton ripstop; strong yet able to breath
  • Seams:   Double stitched; edged with binding
  • All seams have been waterproofed
  • Stitching:   Superior strength quality thread
  • Flysheet:   Waterproof 210 denier Oxford nylon
  • Fly sheet poles:   4mm electro galvanised spring steel
  • Roof tent frame poles:   Annodised aluminium
  • Hinges:   3mm stainless steel; long lasting and rustproof
  • Roof tent cover: UV stabilised PVC, seams are welded for absolute waterproofing
  • Zips:   Inner and outer; lifetime guarantee YKK
  • Base boards: Our roof tent has 12mm marine ply for best insulation and strength

- Extra raised flysheet for shading and coolness when in the roof tent.
- Flysheet is extended past the doors for better rain and wind protection.
- Adjustable roof tent windows open fully for better venting and photography.
- Mosquito nets on every opening; all unzip separately.
- Inner tent has a torch bag, plus two additional storage compartments (shoes/toiletries/other).
- Zips:  U-zips on front and back entrances ensure that your roof tent can be totally sealed against mosquitoes and flying insects.
- 70mm High density foam mattress helps make the Hannibal roof tent almost as comfortable as your own bed.
- The mattress cover is zipped and can be removed for laundering.
- Spacious hinging allows for bedding to be left inside tent when travelling.
- Steps fully profiled for comfort on bare feet.

Size Specifications:

  • Rigged size:  1.3m high x 1.4m wide x 2,44m long 
  • Packed size:   300mm high x 1.4m wide x 1.2m long
  • Weight 58kg
  • £1754.17 plus vat

 

*New canvas should be thoroughly wet before use and allowed to dry. Repeat 2 to 3 times to ensure sealing up of the seams. The wetting process will season the canvas and allow the canvas to shrink and stitching to swell. 

*If water ingress is experienced from the seams use a Bees wax stick over the seams.

2.0m Deluxe Roof tent

2.0m Deluxe Roof tent

The concept of roof tents was pioneered in South Africa and the country has long been the market leader in design and production of tough, quality roof tents.  The safety factor and advantage as a lookout position have made roof tents the most sought after, of safari tents.

The ability to test the Hannibal roof tent in the field, over rough terrain and in all-weather African conditions, has enabled us to produce a roof tent of strength and reliability

STRENGTH

  • Fabric:   The Hannibal roof tent makes use of waterproof, "dynaproofed" 380g polycotton ripstop; strong yet able to breath
  • Seams:   Double stitched; edged with binding
  • All seams have been waterproofed
  • Stitching:   Superior strength quality thread
  • Flysheet:   Waterproof 210 denier Oxford nylon
  • Fly sheet poles:   4mm electro galvanised spring steel
  • Roof tent frame poles:   Annodised aluminium
  • Hinges:   3mm stainless steel; long lasting and rustproof
  • Roof tent cover: UV stabilised PVC, seams are welded for absolute waterproofing
  • Zips:   Inner and outer; lifetime guarantee YKK
  • Base boards: Our roof tent has 12mm marine ply for best insulation and strength

- Extra raised flysheet for shading and coolness when in the roof tent.
- Flysheet is extended past the doors for better rain and wind protection.
- Adjustable roof tent windows open fully for better venting and photography.
- Mosquito nets on every opening; all unzip separately.
- Inner tent has a torch bag, plus two additional storage compartments (shoes/toiletries/other).
- Zips:  U-zips on front and back entrances ensure that your roof tent can be totally sealed against mosquitoes and flying insects.
- 70mm High density foam mattress helps make the Hannibal roof tent almost as comfortable as your own bed.
- The mattress cover is zipped and can be removed for laundering.
- Spacious hinging allows for bedding to be left inside tent when travelling.
- Steps fully profiled for comfort on bare feet.

Size Specifications:

  • Rigged size:  1.3m high x 1.6m wide x 2,44m long 
  • Packed size:   300mm high x 1.6m wide x 1.2m long
  • £2374.17 plus vat

 

*New canvas should be thoroughly wet before use and allowed to dry. Repeat 2 to 3 times to ensure sealing up of the seams. The wetting process will season the canvas and allow the canvas to shrink and stitching to swell. 

*If water ingress is experienced from the seams use a Bees wax stick over the seams.

Hannibal Rear awning 1.4m

Hannibal Rear awning 1.4m

Awnings

Awnings provide shade and comfort, and protection against rain and wind when camping.  Speed and ease of setup is of paramount importance to enable usage while en-route, e.g. for a quick stop at lunchtime. The rear awning deploys in minutes. Making life easier on the road. 

For that reason special importance has been given to the design of the structure and setup takes approx 30 seconds

Innovation

  • Aluminium awning support
  • Awning cover:  polymide ripstop, water resistant
  • Polyurethane bushes allow the arms to swivel avoiding wear and tear
  • Awning poles are totally self-supporting; no poles or guy ropes to trip over!
  • Easy to set up; two arms fold out and the awning is rolled out and clipped in
  • Single handed setup (even in windy conditions)
  • £367.50 plus vat

*New canvas should be thoroughly wet before use and allowed to dry. Repeat 2 to 3 times to ensure sealing up of the seams. The wetting process will season the canvas and allow the canvas to shrink and stitching to swell. 

*If water ingress is experienced from the seams use a Bees wax stick over the seams.

Side awnings

Side awnings

Awnings

Awnings provide shade and comfort, and protection against rain and wind when camping.  Speed and ease of setup is of paramount importance to enable usage while en-route, e.g. for a quick stop at lunchtime

For that reason special importance has been given to the design of the structure and setup takes approx 30 seconds

Innovation

  • Aluminium awning support
  • Awning cover:  polymide ripstop, water resistant
  • Polyurethane bushes allow the arms to swivel avoiding wear and tear
  • Awning poles are totally self-supporting; no poles or guy ropes to trip over!
  • Easy to set up; two arms fold out and the awning is rolled out and clipped in
  • Single handed setup (even in windy conditions)

Size Specifications

  • 1.9m wide for Defender 90
  • 2.4m wide for Defender 110

P.V.C. reinforced corners - drop clips for quick set up.

Sides are available for all Hannibal Awnings. Turn your awning into a change room or extra sleeping room by simply zipping on sides to the awning.

1.9m awning (Defender 90) £525 plus vat

2.4m awning (Defender 110) £630 plus vat 

 

*New canvas should be thoroughly wet before use and allowed to dry. Repeat 2 to 3 times to ensure sealing up of the seams. The wetting process will season the canvas and allow the canvas to shrink and stitching to swell. 

*If water ingress is experienced from the seams use a Bees wax stick over the seams.

Hannibal Jerry Can Bracket Single

Hannibal Jerry Can Bracket Single

Single 20 litre jerry can holder. Fitted without the need for drilling.  £71.66 plus vat

Hannibal roof rack and ladder for Defender 90 & 110

Hannibal roof rack and ladder for Defender 90 & 110

Hannibal roof rack and ladder. Supplied in natural alloy finish. Full length gutter support to spread load, preventing unecessary wear and tear.  These racks come with a rubber guuter protect to save your vehicles paintwork.  Defender 110 rack Length 2.78m, width 1.41m, height 85mm and weight 45kg. Defender 90 Length 2.1m, Width 1.41m, Height 85mm, Weight:38kg

Prices

Defender 90 £1129.17 plus vat

Defender 110 £1324.17 plus vat

 

Accessories

Accessories

 

Wheels

Winches

Trackers and alarm systems 

LED bumpers

Upgraded head lamps

LED lights bars

Spot lights

All terrain tyres

Steering guards

Undersealing

Colour coding

Engine remapping

Stainless steel exhausts

Spare wheel carriers

Roof racks

Snorkels

Jerry can holders

Roof tents

Leather interiors

and more

LR Motors, 1&2 Sussex Court, Thirsk Industrial Park, Thirsk, North Yorkshire, YO7 3TA | Telephone: 01845 444 431